1964-1972 A-Body Front And Rear Disc Brake Conversion Kit

Description: Provides a significant improvement in braking performance compared to the original drum brakes on 1964-72 GM A-Body cars, Includes 11" diameter vented brake rotors, '69-'77 GM style calipers, caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals, and hardware for an easy installation onto factory disc brake spindles, Front kit features a 5 on 4-3/4" wheel bolt pattern for compatibility, Rear kit includes bolt-on caliper brackets, 11-1/4" vented rotors, GM emergency brake style calipers, brake pads, and necessary hardware, Designed to fit 10 & 12 Bolt (non-staggered shock) rear ends from Chevelles, ensuring compatibility and ease of installation 1964-1972 A-Body Front And Rear Disc Brake Conversion Kit Sku # 91604013 Mfr. Part # 91604013 Condition New Brand Speedway Motors Sold Kit Details Info Disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front and rear disc brake conversion kit is perfect for your 1964-72 GM A-Body and uses our new replacement stock height disc brake spindles. The front kit includes 11" diameter vented brake rotors with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles. The rear kit includes two bolt-on caliper brackets, two 11-1/4" vented rotors, two GM emergency brake style calipers, brake pads, and hardware. This kit will fit 10 & 12 Bolt (non-staggered shock) rear ends from Chevelles. The housing flange must have: 3-1/8" center-to-center distance for the top two bolt holes 2-11/16" center-to-center distance for the bottom two bolt holes 2-7/16" distance from the center of the top bolt to the center of the bottom bolt Additional Information: 910-31958 Speedway Deluxe 1967-74 GM Car Front Disc Brake Kit Caliper brackets Backing plates/dust shields Outer wheel bearing cones Inner wheel bearings cones 11" brake rotors, 5 on 4-3/4" RH/LH Calipers Brake pads Spindle nut kit Seals and hardware 910-31924 GM 10 and 12 Bolt Bolt-On Rear Disc Brake Kit w/ E-Brake RH/LH e-brake calipers 11-1/4" rear brake rotors Bolt-on caliper brackets Caliper bolt kit Rotors have both 5 on 4-1/2" and 5 on 4-3/4" bolt circles Fits axle with a maximum flange diameter of 6-1/4" O.D. 2.780" rotor center hole Does not fit all 10 and 12 bolt axles - check Applications for details Requires 15" and larger wheels as 14" and smaller wheels will not clear application. 910-34900 1964-74 GM Car OEM Style Disc Brake Spindles Stock height replacement spindles 617-8568 Rubber Brake Line Hose Set for 7/16"-20 Calipers For 7/16"-20 calipers Comes with banjo bolts 617-3513 7/16 Inch Crush Washers 5/Pk Aluminum For more details and installation photos, see in Super Chevy magazine. Kit Includes: (1) LH Rear Caliper (1) RH Rear Caliper (2) 11-1/4" Rear Rotor (1) Pair, Rear Caliper Brackets (1) Caliper Bolt Kit (2) Seals (1) Pair, Front Caliper Brackets (1) Pair, Backing Plates (2) Outer Wheel Bearing (2) Inner Wheel Bearing (2) Front Brake Rotors (1) LH Front caliper (1) RH Front Caliper (1) Brake Pad Set (1) Spindle Nut Kit (1) Spindle Hardware Kit (1) Front Disc Brake Hardware Kit (1) Pair, Disc Brake Spindles (1) 7/16" Brake Line Hose Set (1) Pack of 7/16 Inch Crush Washers Installation Tips Installation note: Kit will not work with 14" wheels. Must be 15" wheels or larger The inside diameter of the rear rotors will accept an axle flange that has a diameter of 6-1/4" or smaller. If your axle flange exceeds 6-1/4" in diameter, you will need machine your axle flange to decrease your axle flange diameter to fit this rotor as necessary. When utilizing an aftermarket axle with disc brake conversion kits, it may be necessary to reduce the diameter of the axle flange to a diameter necessary to adequately fit inside the required Clearance I.D. that the brake hat/brake rotor will require. (see above diagram for illustration) This disc brake kit does NOT fit all 10 & 12 bolt rear axles This kit does NOT work with staggered shock rear axle configurations as both calipers are positioned to the rear of the housing with this conversion brake kit. Specs Sold in Quantity Kit Bolt Pattern 5 on 4.75" Rotor Diameter 11 Inch Minimum Recommended Wheel Diameter 15 Inch Caliper Finish Natural Color Natural Parking Brake Provision Yes Front Caliper Finish Natural Front Rotor Included Yes Rear Rotor Included Yes Front Caliper Included Yes Master Cylinder Included No Brake Booster Included No Position Front and Rear Rear Caliper Included Yes Front Spindles Included Yes Rotor Type Vented Caliper Pistons One Front Caliper Piston Quantity 1 Front Rotor Diameter 11 Inch Rear Rotor Diameter 11.25 Reviews I would recommend. Rated by Kenny H on October 08, 2020 Summary: I called the tech line and asked about this. Was told there is no reason to re-align. Was asked to send in pics. I did, a week later still no reply. Yes, I recommend this product. Related Items / Suggested Parts GM Style Rally Wheels, Beauty Rings, Derby Caps, 5 on 4.75, Silv. Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 899.99 USD

Location: Lincoln, Nebraska

End Time: 2024-12-19T12:08:24.000Z

Shipping Cost: 0 USD