3-7/8" Closed Custom Refinished USA "Vintage" 1-Blade Folding Pocket Knife

Description: Hi guys and gals this is a vintage very old custom built USA 1-blade folding Pocket knife that I recently put together. NO box or PAPERS. Blade has a very slight hair of side to side movement in open position. The blade I believe is tool steel or high carbon steel but honestly I'm not sure because it has NO name at the bottom but it did come from the very old Schrade factory when it closed and has never been used, I was the first to put a sharpened edge on it.The handle was so old the name was completely warn off so I have no idea what model this was, I did clean it up a good bit but it still has a great deal of dings and stuff, please see all my pics. The studs/rods I used for bolsters I believe was a very mild steel so this was put together for old time display looks or a SUPER SUPER MILD USE, and they will rust over fast if not kept oiled/cleaned.The spring came from the oild knife I got the bolsters from but still has a decent snap in for the age(Very Oiled). Also if blade had heavy use it would develop wobble kinda fast. However, this blade was heat treated greatly so when I sharpened, MAN this edge is super sharp and I imagine since its very oiled it would hold an edge for a very long time if properly used. Also since I'm not proud of the billed my name is NOT on the knife, it's blank with NO NAME. Have a great week, J.S. Johnston Maker/Cleaner Respectfully, Not accepting offers & this is only (1) I have, I did spend a good bit of time cleaning/building and sharpening blade Knife Closed: 3-7/8"

Price: 71.1 USD

Location: Atlanta, Georgia

End Time: 2024-09-13T22:51:36.000Z

Shipping Cost: 0 USD