EPEVER MPPT Solar Charge Controller 40A 30A 20A 10A 12V 24V Auto XTRA-N XDS2

Description: 1111MicrosoftInternetExplorer402DocumentNotSpecified7.8 磅Normal0 1111MicrosoftInternetExplorer402DocumentNotSpecified7.8 磅Normal0 (Our warehouse located in Chicago IL U.S.A supply fast shipping and local engineer afterslae services.) More information please fell free to contact us, we do technical support and answer in time. 1111MicrosoftInternetExplorer402DocumentNotSpecified7.8 磅Normal0 No matter what problems you encounter in the process of purchase or use, our strong after-sales service team will serve you wholeheartedly. Feel free to contact us by eBay message.Usage Note :1111MicrosoftInternetExplorer402DocumentNotSpecified7.8 磅Normal0 Please read the instruction manual carefully or consult customer service to avoid damage to the new controller due to improper operation. The flooded battery must be place in a well ventilated space to avoid any possible danger or explosion. And please make sure that the positive and negative terminals of each component are wired correctly. Technical Data: 1111MicrosoftInternetExplorer402DocumentNotSpecified7.8 磅Normal0 · Model: XTRA3210N (XDS2)· Rated charge and discharge current :30 Amp· MPPT Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%· Nominal system voltage:12V/24V DC auto work (When selecting lithium battery , recommend to set right Lithium type)· Max. PV input power: 390W for 12V battery system or 780W for 24V battery system · Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)· Support Battery types : Lead-acid battery :Sealed / Gel(AGM) / Flooded/User (AGM battery parameters default same as GEL , or setting more accurate as factory advice parameters by USER type ) ; Lithium battery:LiFePO4 (4s/12V; 8s/24V) / Li (NiCoMn)O2 (3s/12V; 6s/24V) / User .· Battery voltage range : 8～32V· MPP voltage range:V(BAT+2V)～72V· Grounding : Common negative grounding· RS485 interface: 5VDC/200mA (RJ45)· Working environment temperature : -25℃～+50℃· Storage temp. range: -20°C -- +70°C/-4°F -- 158°F· LCD backlight time : 60S (Default)· Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#8 AWG(10mm2)· Mounting hole size:Φ5mm· Dimension:230*165*63mm ;· weight :1.31 KG · Model: XTRA4210N (XDS2)· Rated charge and discharge current :40 Amp· MPPT Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%· Nominal system voltage:12V/24V DC auto work (When selecting lithium battery, recommend to set the system voltage as right Lithium type)· Max. PV input power: 520W charge for 12V battery system or 1040W charge for 24V battery system · Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)· Support Battery types : Lead-acid battery :Sealed / Gel(AGM) / Flooded/User (AGM battery parameters default same as GEL , or setting more accurate as factory advice parameters by USER type ) ; Li-ion battery:LiFePO4 (4s/12V; 8s/24V) / Li (NiCoMn)O2 (3s/12V; 6s/24V) / User .· Battery voltage range : 8～32V· MPP voltage range:V(BAT+2V)～72V· Grounding : Common negative grounding· RS485 interface: 5VDC/200mA (RJ45)· Working environment temperature : -25℃～+50℃· Storage temp. range: -20°C -- +70°C/-4°F -- 158°F· LCD backlight time : 60S (Default)· Controller Terminals:#6AWG(16mm2) ; Recommended Wire cable:#8AWG(10mm2)· Mounting hole size:Φ5mm· Dimension:255*185*67.8mm ;· weight :1.70 KG · Model: XTRA4215N (XDS2)· Rated charge and discharge current :40 Amp· MPPT Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%· Nominal system voltage:12V/24V DC auto work (When selecting lithium battery, recommend to set the system voltage as right Lithium type)· Max. PV input power: 520W charge for 12V battery system or 1040W charge for 24V battery system · Max. PV open circuit voltage:150V(at minimum operating environment temperature) ,138V(at 25℃ environment temperature)· Support Battery types : Lead-acid battery :Sealed / Gel(AGM) / Flooded/User (AGM battery parameters default same as GEL , or setting more accurate as factory advice parameters by USER type ) ; Li-ion battery:LiFePO4 (4s/12V; 8s/24V) / Li (NiCoMn)O2 (3s/12V; 6s/24V) / User .· Battery voltage range : 8～32V· MPP voltage range:V(BAT+2V)～108V· Grounding : Common negative grounding· RS485 interface: 5VDC/200mA (RJ45)· Working environment temperature : -25℃～+45℃· Storage temp. range: -20°C -- +70°C/-4°F -- 158°F· LCD backlight time : 60S (Default)· Controller Terminals:#6AWG(16mm2) ; Recommended Wire cable:#8AWG(10mm2)· Mounting hole size:Φ5mm· Dimension:255*187*75.7mm ;· weight :2.07 KG · Model: XTRA4415N (XDS2)· Rated charge and discharge current :40 Amp· Nominal system voltage:12V/24V/36V/48V DC auto work (When selecting lithium battery type, you should choose BAT type by manual ,as the Li-ion bat voltage can’t be identied automatically)· Max. PV input power: 520W charge for 12V battery or 1040W @ 24V or 1560W @ 36V or 2080W @ 48V . · Max. PV open circuit voltage:150V(at minimum operating environment temperature) , 138V(at 25℃ environment temperature)· Support Battery types : Sealed(default) ,Gel (AGM), Flooded, User ; LiFePO4 (4s/12V; 8s/24V;15s-16s/48V ); Li (NiCoMn)O2 (3s/12V; 6s-7s/24V ;13s-14s/48V) ; User Defined (9~68V)· Battery voltage range : 8～68V· MPP voltage range:V(BAT+2V)～108V· Grounding : Common negative grounding· RS485 interface: 5VDC/200mA (RJ45)· Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%· Working environment temperature : -25℃～+50℃· Storage temp. range: -20°C -- +70°C/-4°F -- 158°F· LCD backlight time : 60S (Default)· Controller Terminals:#6AWG(16mm2) ; Recommended Wire cable:#6AWG(16mm2)· Mounting hole size:Φ5mm· Dimension:255*189*83.2mm ; weight :2.47 KG Package List: 1 X MPPT Solar Charge Controller (XTRAN-XDS2)1 X Temperature sensor unit for controller（Model:RT-MF58R47K3.81A）1 X Manual (English) Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1. Battery must be connected with controller first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.) Note: The following accessories are not included in controller box , you could check and purchase accessories separately . MT50 RTS300R47K3.81A CC-RS485-USB-150U EPEVER BLE Adapter EPEVER WiFi Adapter eLOG01 XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for o -grid photovoltaic systems, with optional display units (XDB1/XDS1/XDS2). In order to maximize the energy harvest from PV arrays and simultaneously minimize the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher e cient charging, compared to a conventional pulse width modulation (PWM) charge controller.Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions. Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under di erent application requirements.XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which e ectively prolongs the lifespan of battery and signi cantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the o -grid solar system.XTRA series controller can be widely used in RV, telecommunication base station, household system,field monitoring, etc. Product Features Advanced MPPT technology & ultra-fast tracking speed is up to 99.5 % guaranteed Maximum DC/DC transfer e ciency is as high as 98 %,full load transfer e ciency is up to 97.4 % Wide MPP operating voltage range Low temperature protection and self activate function for lithium battery charging Limit charging power & current over rated range Real-time energy statistics function Multiple load work modes Comprehensive electronic protection Compatible with lead acid and lithium-ion①batteries Over temperature protection and power degrading in higher temperature Optional LCD display units (XDB1/XDS1/XDS2) and accessories High quality and low failure rate components of ST or IR to ensure service life Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol Monitor and set the parameters via APP or PC software Dustproof and waterproof design with IP32② protection class CE certi cation(LVD IEC62109,EMC EN3/1-6-61000) ① If using Lithium battery,customer should ask help for “PCsoftware” to set the lithium battery parameters ② Ingress of solid objects：Protected against solid objects over 2.5mm ② Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical Protection function✦ PV over current protection✦ PV short circuit protection✦ Lithium battery low temperature protection✦ Night reverse charging protection✦ Battery reverse polarity protection✦ PV reverse polarity protection✦ Battery over discharge protection✦ Battery over heat protection ✦ Battery over voltage protection✦ Load short circuit protection ✦ Load overload protection✦ Controller overheating protection1111MicrosoftInternetExplorer402DocumentNotSpecified7.8 磅Normal0 Electrical parameters ModelXTRA3210NXTRA3215NXTRA4210NXTRA4215NXTRA4415NNominal system voltage12V/24VDC auto work12V/24V/36V/48VDC auto workRated charge current30A30A40A40A40ARated discharge current30A30A40A40A40ABattery input voltage range8～32V8～68VMax. PV open circuit voltageXTRA**10N :100V at Min operating environment temp; 92V at 25℃environment temp XTRA**15N :150V at Min operating environment temp; 138V at 25℃environment tempMPP voltage rangeXTRA**10N : (Battery Voltage +2V)～72VXTRA**15N : (Battery Voltage+2V)～108V Max.PV input power390W/12V 780W/24V390W/12V 780W/24V520W/12V 1040W/24V520W/12V 1040W/24V520W/12V 1040W/24V1560W/36W2080W/48VBattery typeSealed / Gel / Flooded; LiFePO4 / Li(NiCoMn)O2 /UserLithium battery(LiFePO4 /Li(NiCoMn)O2/User) ◆ Lead-acid batteryEqualize charging voltageSealed: 14.6V, Flooded: 14.8V,User-defined: 9~17VBoost charging voltageGel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, User-defined: 9~17VFloat charging voltageGel /Sealed /Flooded: 13.8V, User-defined: 9~17VLow voltage reconnect voltageGel /Sealed /Flooded: 12.6V, User-defined: 9~17VLow voltage disconnect voltageGel /Sealed /Flooded: 11.1V, User-defined: 9~17V◆ Lithium-batteryBoost charging voltageLiFePO4:14.4V；Li(NiCoMn)O2：12.4V；User:9-17VFloat charging voltageLiFePO4:13.6V；Li(NiCoMn)O2：11.8V；User:9-17VLow voltage reconnect voltageLiFePO4:12.4V；Li(NiCoMn)O2：10.40V；User:9-17VLow voltage disconnect voltageLiFePO4:11.0V；Li(NiCoMn)O2：9.20V；User:9-17VLithium batteryLiFePO4（4S; 8S）/Li(NiCoMn)O2（3S; 6S; 7S） Self-consumption≤14mA(12V)≤15mA(24V) ● Controller can not auto recognize system voltage when battery type is "lithium battery“, please confirm thesystem voltage before use. ※ Without equalize charging when the battery type is "lithium battery". ◆ Technical data for 12V system at 25 ℃, twice in 24V system.Discharge circuit pressure drop≤0.18VTemp. compensation-3mV/℃/2V (Lithium type has no Temp. compensation)GroundingCommon negativeRS485 communication interface5VDC/100mARelay interface30VDC/1ALCD backlight time60s(default) Environment parameters Working environment temperature-25℃～+45℃（with LCD） -30℃～+45℃（No LCD）Storage temperature range-30℃～+70℃Humidity range≤95%,(N.C)EnclosureIP33※ In the working environment temperature range ,Controller can be full load operation . Mechanical parameters ModelXTRA3210-XDS2XTRA3215-XDS2XTRA4210-XDS2XTRA4215-XDS2XTRA4415-XDS2Dimension230*165*63mm255*185*67.8mm255*185*67.8mm255*187*75.7mm255*189*83.2mmTerminals6AWG(16mm²)6AWG(16mm²)6AWG(16mm²)6AWG(16mm²)6AWG(16mm²)Net weight1.31kg1.70kg1.70kg2.07kg2.47Kg Accessories (optional): MT50 ; WiFi adapter (EPEVER-WiFi-2.4G-RJ45-D) ; BLEadapter (EPEVER-BLE-RJ45-D); PC Cable (CC-USB-RS485-150U ); Temp sensor cable (RTS300R47K3.81A) We have our own warehouse in Chicago IL US , which can promise the fastest delivery speed, and offer the best logistic service for you. No matter what problems you encounter in the process of purchase or use, our strong after-sales service team will serve you wholeheartedly. Feel free to contact by eBay message. [Usage Note]Please read the instruction manual carefully or consult customer service to avoid damage to the new controller due to improper operation. The flooded battery must be place in a well ventilated space to avoid any possible danger or explosion. And please make sure that the positive and negative terminals of each component are wired correctly.

Price: 99.99 USD

Location: Shenzhen,Guangdong

End Time: 2023-12-10T08:31:05.000Z

Shipping Cost: 0 USD