FloJet RV Macerator Pump

Description: RV Macerator Pump from Flojet Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon. The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high quality Jabsco design found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump up hill, and around corners. The RV waste pump will simplify and improve your RV experience! Features: Neat and clean way to quickly evacuate waste tanks Empty black-water and greywater Holding Tanks at home Grinds waste as it pumps Built-in Impeller Protection Device...longer life! Flow of up to 13 GPM for fast, clean Holding Tank evacuation Easy to Install Because it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home. Applications Empty holding tanks and avoid dump stations Transfer waste from recirculating toilets to main holding tank Impeller Release Feature After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown. Specifications Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate Impeller: "Jabsco Nitrile" compound Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum Seal: Lip Type Ports: Inlet RV model - 3" (76mm) hose Outlet - 1" (19mm) Hose Barb Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dry Complies with USCG Regulation 183.410 & ISO 8846 MARINE for Ignition Protection Weight: 3.5lb (1.6 kg) Approx. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Additional Specs (If Applicable): Shipping Information FREE Shipping only applies to the Continental 48 States. There may be additional shipping fees for items going to Hawaii, Alaska, and Puerto Rico. NO PO Boxes with UPS Shipping. Most Items ship out same day if placed before 2 PM Eastern Time. Tracking information will be uploaded into eBay when it has been shipped. You will receive an email from eBay with this notification. Our products ship from Florida, New Jersey, Arizona and occasionally from other warehouses in the United States to ensure package transit times and item availability are optimized. The estimated delivery date from eBay may be inaccurate. We offer discount overnight services for most items using FedEX Next Day Air. Returns/Refunds We cannot accept the return of software unless it was defective upon receipt. Please verify that you have the correct product prior to purchasing. Most of our items have a 30 day Return Policy. Non-Defective items must be Returned in the original packaging with all accessories and paperwork. The item must be unused and/or uninstalled. Defective items must be returned without Physical damage. If the item was damaged during shipping, please let us know within 8 hours of receipt. Please contact us prior to shipping an item to us to obtain an RMA number. You may also use the eBay return link.

Price: 237.35 USD

Location: Tampa, Florida

End Time: 2025-01-29T17:41:52.000Z

Shipping Cost: 0 USD