MSD 9150ULTRA SBC Ignition Kit – Ultra 6AL/Distributor/Wires/Blaster SS Coil

Description: MSD 9150 Ignition Kit - Digital 6AL-2/Distributor/Wires/Blaster SS Coil SBC Item Description SK Speed Part Number: EZKMSD9150ULTRA This listing is for a COMPLETE MSD Ignition System for your Small Block Chevy!Included is an MSD Ultra 6AL Ignition Box (6423), Pro-Billet Distributor (85551), 8.5mm Super Conductor Wire Set (35659) and a Blaster SS (8207). We've put together a complete kit to take the guess work out of choosing the right components for your performance small block Chevy engine! Ultra 6AL Ignition Box - Part #6423The Ultra 6AL greatly expands on the capabilities of the 6-series line with three rev limiters (Launch, Burnout, and Step Retard activation) and is wirelessly controlled from a smart phone via the "MSD Ultra 6AL" app. A Programmable Step Retard (up to 30 degrees) is available for: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation. High level of security connection from phone to Ignition box (encryption) including sequence in push button implementation. Mobile app available settings include Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, Start retard value. Pro-Billet Distributor - Part #85551This is MSD's most popular performance distributor! The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500” steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSD’s adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. 8.5mm Super Conductor Wire Set - Part #35659The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12" length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, MSD uses a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. These wires have a 90 degree end at the spark plug. A coil wire is included as well. Blaster SS Coil - Part #8207Don’t let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts!The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90° boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications. No Returns after 30 Days of sale date. You must return an item in the same condition as it was received, not used, installed, or altered in any way. Returned merchandise must be in original packaging, factory sealed and un-installed. There will be a minimum 50% inspection, testing and re-certification charge if the merchandise does not meet these requirements. There will be no returns on electrical merchandise or software if it is not factory sealed. Any and all warranty issues will be handled directly by the manufacturer and the end user. Seller assumes no responsibility for misuse or misapplication.

Price: 999.98 USD

Location: Lindenhurst, New York

End Time: 2024-08-09T14:16:29.000Z

Shipping Cost: 0 USD