Description: This Dual Bevel Spear Point marking knife is made by Narex, a world-class edge tool manufacturer in the Czech Republic. These blades are made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. The blades are 1-7/8 inches long, 1/2 inch wide and 0.060" inch thick. Blades have a dual-bevel spear point tip. The tips are ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines. The laser cut finger indents are useful for applying pressure closer to the tip.The blades are the perfect tool to make marks in narrow recesses such as when transferring pins/tails marks during dovetailing. The dual bevels will mark distinct lines on both the right and left side of a part or guide. They will leave crisp lines when marking with and against the grain and on end grain. These knives may require just a light stropping to remove a small wire edge to get them razor sharp and ready to use. These knives can be used either unhandled or wood scales can be attached to create a handle. If a handle is desired the kits come with 2 brass pins to affix scales to the blade. Knife specs: Blade material: AISI 420 corrosion resistant stainless steel hardened HRC 57 Blade profile: standard thickness with finger indents Blade length 5-7/8” Blade thickness: 0.060" Blade width: 1/2”
Price: 15.99 USD
Location: Alamo, California
End Time: 2024-10-13T21:39:25.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Narex
Type: Blades
Number of Pieces: 1
Model: Narex Unhandled Marking Knife
Material: Steel
Country/Region of Manufacture: Czechia
