Power FX-4 series 12vdc controller, UTV, ATV Side by Side, Motorsports accessory

Description: This FX-4 power controller allows you to easily connect four 12vdc accessories up to 30 amps each to your side-by-side, car, truck, powerboat etc. Each output channel is circuit breaker protected and the entire unit is completely sealed and potted. Power FX power controllers can be mounted onto any flat surface either inside the vehicle or under hood and eliminate the confusion of adding relays and fuses to safely operate all your aftermarket devices. LED light bars, Cube Lights, Chase Lights, LED Whips, sound systems, electric fuel pumps, electric fans or any high amperage device connects directly to the output terminals of this controller. You can now run all of your accessories at the same time thru your accessory terminal wiring without blowing fuses or damaging your vehicles electrical system. All of your accessory switches illuminate with the key on / acc. position with less than .1 amp draw total. Factory accessory terminals typically only handle 10 amps max so trying to run multiple LED light bars, Rock lights, LED Whips, sound systems or any combination of these devices connected to the accessory terminal will blow the factory fuse. Please specify the breaker rating for each channel when ordering, up to 30 amps per channel. 2,3,4,5, and 6 channel units are available. Higher output models made per request. Dimensions: FX-2 = 6" x 6" x 2.5" tall to the top of power cable protective boot. FX-4 = 8" x 6" x 2.5" tall to the top of power cable protective boot. FX-6 = 9.125" x 6" x 2.5" tall to the top of power cable protective boot. Controllers are custom made per order and come with a 1 year warranty.

Price: 200 USD

Location: Algonac, Michigan

End Time: 2025-01-27T02:14:14.000Z

Shipping Cost: 0 USD