Description: Key Features: For Studio Voice and Instrument Miking Cardioid, Omni & Figure-8 Polar Patterns K47-Style Capsule Reproduction -10 dB Pad Prevents Distortion 70 Hz High-Pass Filter Includes Shockmount and Hardmount Gold-Sputtered, Dual Large Diaphragms Fully Discrete Signal Path Transformerless Balanced XLR Output Requires 48V Phantom Power Offered here in a nickel finish, the Warm Audio WA-47jr is a large-diaphragm FET condenser microphone designed to provide the tonal characteristics of classic solid-state U47 microphones for vocalists, musicians, and recording engineers in home, project, and commercial recording studios. Thanks to three polar patterns—cardioid, omnidirectional, and figure-8—selectable from a switch on the front of the body, its versatility allows it to excel at anything from dry, close-up vocals to ambient room sounds. A -10 dB pad switch raises the maximum SPL from 147 dB to a high of 157 dB, enabling safe use when miking kick drums and cranked guitar and bass amps. Excessive low frequencies from proximity effect are easily reduced via the high-pass filter, which rolls off lows below 70 Hz.The K47-style capsule reproduction features dual gold-sputtered, 6-micron Mylar diaphragms with a single backplate. The fully discrete signal path includes Toshiba FETs, WIMA film capacitors, and Panasonic electrolytic capacitors to deliver the clean tone associated with transformerless microphones. With a gold-plated XLR 3-pin connector and operability via 48V phantom power, it is compatible with most mixing consoles and mic preamps. It comes with a vibration-reducing shockmount and a compact hardmount to allow flexibility in placement and positioning. Specifications: Primary Applications: Studio Recording Form Factor: Large Diaphragm Mic / Stand/Boom Mount Intended Sound Sources: Vocals, Instrument Sound Field: Mono Operating Principle: Pressure Gradient Capsule: Condenser Diaphragm: 1.3" / 34 mm Polar Pattern: Cardioid, Figure-8, Omnidirectional Pattern Selection: Switched (Adjustable on Mic) Orientation: Side Address Circuitry: Solid-State (FET) Pad: -10 dB High-Pass Filter: 70 Hz Tone Adjustment: None Gain Adjustment: None Indicators: None On-Board Controls: High-Pass Filter, Pad, Polar Pattern Windscreen: None Frequency Range: 20 Hz to 20 kHz Maximum SPL: 147 dB SPL (1 kHz, .5% THD, 1-Kilohm Load), 157 dB SPL (1 kHz, .5% THD, 1-Kilohm Load, with Pad) Impedance: 100 Ohms Load Impedance: ≥ 1000 Ohms Sensitivity: -40 dB Dynamic Range: 138 dB A-Weighted Signal-to-Noise Ratio: 85 dB A-Weighted Equivalent Noise Level: 9 dB A-Weighted Output Connectors (Analog): 1 x XLR 3-Pin Male (on Mic) Headphone Connector: None Operating Voltage: 48 V (Phantom Power) Color: Nickel Mounting: Mic Clip/Stand Adapter, Shockmount (Included) Mounting Thread Size: 5/8"-27 Female (3/8"-16 Female with Included Adapter) Included Case: Zipper Pouch Included Filters: None Dimensions: ø: 2 x L: 8.3" / ø: 5.2 x L: 21 cm Weight: 1.1 lb / 0.5 kg Package Weight: 3.83 lb Box Dimensions (LxWxH): 11.15 x 10 x 6.2" In the Box Warm Audio WA-47jr Large-Diaphragm FET Condenser Microphone (Nickel) Shockmount Hardmount Zippered Storage Pouch Thread Adapter Limited 1-Year Warranty MPN: 323637 UPC: 713541493124
Price: 299 USD
Location: Carlsbad, California
End Time: 2024-12-18T21:47:52.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
UPC: 713541493124
MPN: WA47JR
Brand: Warm Audio
Connectivity: Wireless, Wired
Form Factor: Condenser Microphone
Features: High-Pass Filter, Built-in Low Cut Filter, Switchable Frequencies, FET Circuitry
Model: WA-47jr